FurunoApproved Dealer

Furuno marine electronics,
supplied & fitted on the Yorkshire coast

Radar, chartplotters, fish finders, AIS, autopilots and comms for fishing, work and leisure boats on the Yorkshire coast. Build a quote list, tell us about the vessel, and we come back with a firm price, lead time and fitting options. No payment is taken online.

0 products
← Back
Transducer finder

Find the right transducer

Answer what you know. The shortlist on the right updates as you go, and anything you leave as “not sure” just keeps more options in.

Which sounder?not answered

Pick the Furuno unit the transducer will plug into. TZT10X/13X/16X, TZT9E/13E and TZMAP9/13 have a fish finder built in; TZT22X, TZT24X and TZTBBX do not, so for those pick the black-box sounder (DFF1-UHD+ or DFF3D) or the networked TZT10X/13X/16X that will drive the transducer.

FCV600(600 W, 10-pin)FCV800(600 W / 1 kW, 10-pin)DFF1UHD+(300 W / 600 W / 1 kW CHIRP, 10-pin)TZT10X/13X/16X(built-in dual-channel 1 kW CHIRP & CW, 12-pin)TZT9E/13E(built-in 1 kW CHIRP or CW, 10-pin)TZMAP9/13(built-in 1 kW CHIRP or CW, 10-pin)DFF3DDFF3D multibeamFCV295(1-3 kW, bare-wire)FCV1150L(1-3 kW, bare-wire)FCV-1900(1-3 kW, CHIRP)FE800(50 or 200 kHz)Another make or modelTell us the model in the enquiry and we will match itNot decided yetLeave it to us

Boat lengthnot answered

Transom mounts suit small outboard boats; bigger boats need a thru-hull or pocket mount.

Under 8 m8–12 m12–20 mOver 20 mNot sureLeave it to us

Hull materialnot answered

Decides the housing: bronze for GRP and wood, stainless or plastic on steel and aluminium.

GRP / fibreglassSteelAluminiumWoodNot sureLeave it to us

Enginenot answered

Inboard wash and shafts rule out a transom mount.

OutboardInboardNot sureLeave it to us

Hull shape under the transducernot answered

Deadrise is the angle of the hull bottom from horizontal where the transducer will sit. Over about 8° the beam needs a fairing block or a tilted element to point straight down; otherwise you lose bottom and depth.

Flat or shallow VDeadrise under 8° – displacement hulls, most workboatsModerate VDeadrise 8–15° – semi-displacement, many potters and charter boatsSteep VDeadrise over 15° – planing hulls, deep-V angling boatsNot sureLeave it to us

Fairing block?not answered

A fairing block is a shaped timber or plastic wedge that levels the transducer to the hull angle and streamlines it. It gives the best performance on any V hull. Without one, a thru-hull only works on a flat run of hull, a keel pocket or a transom mount.

With fairing blockRecommended on a V hull – fitted and faired in by usWithout fairing blockFlush fit: flat hull section, pocket mount or transom onlyNot sureLeave it to us

How you fishnot answered

Sets the frequency: high for gear and bottom detail inshore, low for depth, dual-band for marks through the water.

Potting / netting inshorePots, nets, rough groundTrawling / scallopingTowed gear, bottom hardnessCharter / anglingFish marks, wrecksLeisure / passageDepth under the keelNot sureLeave it to us

Working depthnot answered

Depth sets the power. Most Yorkshire coast potting is inside 100 m.

Under 50 m50–150 m150–500 mOver 500 mNot sureLeave it to us

Installationnot answered

Thru-hull gives the best performance; in-hull tanks and transom mounts avoid a new hole.

Happy to drill the hullThru-hull or pocket mountNo new holesTransom mount or in-hull tankReplacing an existing thru-hullWe match the hole and fairingNot sureLeave it to us

Does the boat do over 25 knots?not answered

Transom mounts lose the bottom at speed; thru-hull with fairing or a pocket mount keeps clean water on the face.

NoYesNot sureLeave it to us

Speed and temperaturenot answered

Some transducers include a paddlewheel and temperature sensor; otherwise a separate sensor can be added.

Depth onlySpeed and temp from the transducerSeparate NMEA 2000 sensorDST820 for an FI-70 instrument networkNot sureLeave it to us

Your shortlist

Answer a question to start

No sounder chosen yet. The shortlist only works for the Furuno sounders in the shop, so for this one we match the transducer ourselves. Answer the rest of the questions, then send them to us and we will come back with a recommendation and price.
Send my answers to Tide & Volt
Which sounder: not sure
Boat length: not sure
Hull material: not sure
Engine: not sure
Hull shape under the transducer: not sure
Fairing block: not sure
How you fish: not sure
Working depth: not sure
Installation: not sure
Does the boat do over 25 knots: not sure
Speed and temperature: not sure